Robot TAWERs TL WGIIII
Long-Arm & High Payload Type TL Manipulators. Revolutionary new type of arc welding robot with advantages of both Through-Arm Type and External Type.
“Weld Navigation” allows easy parameter setting , Easy setting with Teach Pendant. Swivel rack in the case makes maintenance easy and saves space. Cables with connectors on both ends reduce Cable exchange time.
Category: MIG / MAG ROBOT WELDING
TAWERS Technology―Various Welding Processes
SP-MAGⅡfor short-circuit mixed gas welding on thin plates.
HD-Pulse for high-speed and low-spatter in high-current pulsed mixed gas welding.
MTS-CO₂ for CO₂ welding
Reduces spatter by up to 75 % using inexpensive CO2 gas, MTS control added to SP-MAG technology reduces spatter of CO2 welding.
Achieves high-speed pulsed welding
HD-Pulse advantages:Short and narrow arc prevents undercuts during high-speed welding.Preventing undercuts with ideal penetration!
Production and Quality Control on LAN
The LAN connection allows you to share welding data with other robots and improve production and quality control.
Quality Weld Starts and Ends. Spatter and Cycle Time Reduction
The robot lifts up the welding torch quickly at the start and end of the weld. By coordinating the robot motion with the welding waveform and wire feed control, quality and cycle time are improved.
Executes arc-on/off programs a little before the torch reaches the weld start/end point to reduce cycle times
Arc Start Retry (for CO₂/MAG)
Detecting a failure of arc start, the robot automatically starts arc ignition again.
Wire Auto Retract
As the robot moves to weld start points, the wire is retracted automatically; thereby, improving arc start.
Torch Angle Display (Teach Pendant)
Torch angle is displayed on the screen, making it possible to reduce teaching time and obtain consistent bead appearance
Wire Stick Auto Release (for CO₂/MAG)
Automatically detects a wire stuck at the end of a weld and re-ignites the arc to release the wire.
Pitch Movement (“Jog settings”)
This function enables robot movement at a pre-set distance by every click of the jog dial. This is useful .when working in narrow,
constricted spaces or in fine-tuning robot position.
In Teach mode, operator can safely verify taught program including welding without switching to Auto mode
|ROBOT WORKING AREA||MAX (MM)||1801||1999|
|MOMENTARY MAXIMUM SPEED||RT||195|
|POSITION REPEATABILITY||± 0.08||± 0.15|
INPUT POWER SOURCE
|INPUT POWER SOURCE||3 PHA , AC 200V±20V, 22KVA, 50/60HZ|
|OUTPUT CURRENT ADJUSTABLE RANGE||30-350A|
|OUTPUT VOLTAGE ADJUSTABLE RANGE||12-36 VDC|
|RATED DUTY CYCLE (10MIN. INTERVAL)||80% @ 350A
60% @ 350A pulse