RANGER® 250 GXT STAINLESS STEEL CASE (KOHLER®)
Model: Ranger 250 GXT
Get all of the XTras needed for construction and maintenance work. That’s XTra welding performance with 250 amps for AC or DC stick and DC wire welding and XTra power with up to 11,000 watts peak for lights, grinders or high amperage equipment.
You also get Xtra protection and quiet operation with the Lincoln enclosed case.
Category: WELDING GENERATOR
Description
FEATURES
EXTRA POWER, EXTRA PERFORMANCE
Get all of the XTras needed for construction and maintenance work. That’s XTra welding performance with 250 amps for AC or DC stick and DC wire welding and XTra power with up to 11,000 watts peak for lights, grinders or high amperage equipment. You also get XTra protection and quiet operation with the Lincoln enclosed case.
- Totally Enclosed Case
- Engine is fully protected.
- 3 service access doors.
- Low Noise – 76.4 dBA sound level at 23 ft. (7 m). 100.7 dB sound power (Lwa) at rated output.
- Choose from painted, camo wrapped, or stainless steel roof, case sides and engine doors.
- Versatile AC/DC Welding
- AC/DC welding output for a broad range of stick electrode types.
- Excellent AC TIG welding with optional TIG Module and either a foot or hand Amptrol™ for aluminum and other alloy welding.
- MIG and Flux-Cored capable (with optional equipment).
- Remote ready! 6-pin connector and local/remote switch for remote control operation.
- 11,000 Watts Peak Single-Phase AC Generator Power
- Peak for motor starting.
- 10,000 watts continuous power for generator, plasma cutter or inverter welder.
- Lights, grinder, power tools.
- 23 HP Kohler® Gasoline Engine
- 2 cylinder, 4 cycle overhead valve air-cooled design.
- Electric fuel pump avoids vapor lock.
- Oil drain extension for easy oil changes.
- 12 gallon tank for extended run times.
- Electric fuel gauge located on control panel makes it easy to check the fuel level during operation and refueling.
- Rugged Reliability
- Welding and AC Generator Outputs Rated at 104°F (40°C).
MACHINE SPECIFICATIONS
MACHINE SPECIFICATIONS | |||||||
Product
Name
|
Order
|
Description
|
CC Rated Output
Current/Voltage/ Duty Cycle
|
CV-Rated Output
Current/Voltage Duty Cycle/
|
Generator
AC Power(2),(3)+
|
Dimensions
H x W x L (mm) |
Weight
(kg) |
Ranger® 250 GXT
Kohler® OHV |
K2382-4
|
250 Amp AC/DC Arc Welder 11,000 WattsPeak 10,000 Watts Continuous AC Power
|
AC Constant Current 250A/25V/100% DC Constant Current
Current Ranges 160-250A 110-180A 70-130A 50-80A
Max OCV @ 3700 RPM 80V RMS
|
DC Constant Voltage(1) 250A/25V/100% 14-22V 18-28V |
11,000 Watts Peak
10,000 W Continuous
60 Hz Single Phase 1 pha – 60Hz Two 120V Duplex Receptacles
20A per Duplex 40A Total(4) 120V/240V Receptacle 42A Each 120V Branch(4) 42A @ 240V |
759 x 546 x 1073
To top of exhaust tube
|
273 |
ENGINE SPECIFICATIONS | ||||||
Engine Model
|
Description
|
Horsepower &
Displacement |
Ignition
|
Capacities
|
Operating
Speeds
|
Fuel
Consumption
|
Kohler® OHV(5)
Command CH23S (Gasoline) |
2 Cylinder, 4 Cycle, OHV Air-Cooled Gasoline Engine
Aluminum Alloy with Cast Iron Liners Electric Fuel Pump
|
23 HP @ 3600 RPM
41.0 cu in (674 cc) |
Electric Start
12V Battery 435 Cold Cranking Amps Manual Choke
|
FUEL:
12 Gals (45 Ltrs.) OIL: 2.0 Qts (1.9 Ltrs) |
Full Load 250A DC
3,500 RPM |
1.5 Gals/Hr
5.7 Ltr/Hr. |
High Idle
3,700 RPM |
0.8 Gals/Hr
2.9 Ltr/Hr |
|||||
Low Idle
2,400 RPM |
0.4 Gals/Hr
1.5 Ltr/Hr |
Additional information
Đặc điểm | Tính năng cao, hiệu suất cao, tính an toàn cao |
---|---|
Phương pháp hàn | Hàn que, hàn TIG, dây lõi thuốc, thổi than |
Ứng dụng | – Xây dựng |
tuan giang –
verry good