Dragon Cutting & Bevelling Track Carriage
Dragon is a state-of-the-art, digitally controlled track torch which features a precise, stable travel speed that produces accurate cuts and bevels. The machine can be used on any standard 6˝ V-grooved track. High speed plasma cutting and beveling is available with Dragon HS.
Category: TRACTORS WELDING MACHINE
Description
Key features
Primary features and benefits:
- State-of-the-art, digitally controlled track torch
- Cutting and beveling up to 45o (also parallel by means of 2 torches)
- Quick clamping torch holder for torch diameter from 28 mm to 35 mm
- Advanced speed control system with implemented digital PID regulator
- LED display with readout of actual and set speed, and report messages
- Rigid heat-proof design
- 2-wheel drive with auto – braking drive unit
- Quick drive release switch for easy re-positioning
- Runs on a rail or directly on a workpiece
- Connectable rails to form various lengths
- Wide assortment of optional accessories for variety of applications, like machine barrel torch holders, manifolds, circle cutting attachment etc.
Technical specification
Dragon | Dragon HS | |
---|---|---|
Voltage | ~ 115–230 V, 50–60 Hz ~ | ~ 115–230 V, 50–60 Hz |
Power | 20 W | 20 W |
Operating position | horizontal | horizontal |
Torch diameter | 28–35 mm (1.10–1.38’’) | 28–35 mm (1.10–1.38’’) |
Ground clearance | 8 mm (0.31’’) | 8 mm (0.31’’) |
Speed | 0–150 cm/min (0–59 in/min) |
10–300 cm/min (4–118 in/min) |
Weight | 16.8 kg (37.0 lbs) | 16.8 kg (37.0 lbs |
-
- Straight cutting
-
- Quality cuts and bevels reduce fit-up and grinding time and lay the foundation for a high quality weld
-
- Strips cutting
-
- Circle cutting
-
- LED display with readout of actual and set speed, and report messages
-
- Diagonal cutting (bevelling)
-
- DRAGON HS for plasma
-
- DRAGON for Oxy-Fuel
Brochures
Make sure you are familiar with Dragon | Cutting & Bevelling Track Carriage brochure including technical data and detailed information about this product. Should you have any further questions we encourage you to send us an enquiry.
Dragon | Cutting & Bevelling Track Carriage
Size: 2.1 MB Type: PDF
Size: 3.7 MB Type: PDF
Demo Video
Accessories
Standard accessories for both Dragon and Dragon HS
- RAM-0475-07-00-00-0 580 mm (22.8’’) Geared Rack
- PWG-0475-09-00-00-0 Counterweight 1.3 kg (2.9 lbs)
- UCW-0475-28-00-00-0 Standard Torch Holder with angle adjustment
- Power cord 3 m (9,7 ft)
Optional accessories for both Dragon and Dragon HS
- TRO-0475-13-00-00-0 Track Assembly 1800 mm (70,9”) V” Groove Center Line 152 mm (6”)
- ZSP-0475-44-00-00-0 Magnetic Unit
- PDS-0582-10-00-02-0 Magnetic Narrow Unit with hexagon
- MST-0541-10-02-00-0 Vacuum Modular Unit
- RAM-0475-23-00-00-0 1000 mm (39.4”) Geared Rack
- PWG-0475-10-00-00-0 Large Counterweight 2,6 kg (5,7lbs)
- UCW-0475-08-00-00-0 Precise Torch Holder with angle and height adjustment
- UCW-0475-15-00-00-1 Slide Rack Holder
- ZCS-0475-28-10-00-0 Standard Torch Holder 28–35 mm (1.10–1.38’’)
- PDT-0475-26-00-00-0 Roller Support
- PDT-0475-34-00-00-0 Cable Anchor
- CYR-0475-22-00-00-0 Circle Cutting Attachment
- OSL-0475-54-00-00-0 Heat Protection Shield (left)
- OSL-0475-55-00-00-0 Heat Protection Shield (right)
- OSL-0475-53-00-00-0 Heat Protection Shield (bottom)
Optional accessories for Oxy-fuel
- Manifold 2×2 RZD-0475-64-00-00-0 (metric) RZD-0475-68-00-00-0 (imperial)
- Manifold 2×3 RZD-0475-63-00-00-0 (metric) RZD-0475-67-00-00-0 (imperial)
- Manifold 3/3 RZD-0475-74-00-00-0 (metric) RZD-0475-73-00-00-0 (imperial)
- Manifold 2×2 with cut-off valve RZD-0475-65-00-00-0 (metric) RZD-0475-70-00-00-0 (imperial)
- Manifold 2/3 with cut-off valve RZD-0475-66-00-00-0 (metric) RZD-0475-69-00-00-0 (imperial)
- Manifold 3/3 with cut-off valve RZD-0475-72-00-00-0 (metric) RZD-0475-71-00-00-0
- (imperial)
- UCW-0475-61-00-00-0 Machine Barrel Torch Holder Ø 30 mm (1.18”)
- UCW-0475-29-00-00-1 Machine Barrel Torch Holder Ø 35 mm (1.38”)
- UCW-0475-59-00-00-0 Precise Machine Torch Holder Ø 30 mm (1.18”)
- UCW-0475-42-00-00-1 Precise Machine Torch Holder Ø 35 mm (1.38”)
Optional accessories for Plasma (Dragon HS)
- ZSP-0475-58-00-00-0 Plasma Arc Ignition
- KBL-0475-58-05-00-0 Plasma Arc Ignition Cable
Reviews
There are no reviews yet.