Robot TL GIII
Robot TL GIII
Long-arm & high payload !
A variety of features specialized for arc welding. “Weld Navigation” allows easy parameter setting “Weld Navigation” allows easy parameter setting.
CO₂/MAG/MIG welding robot system selectable to fit your application. Good bead appearance and low spatter even in high speed welding
Category: MIG / MAG ROBOT WELDING
Description
Weaving Function (6 patterns)
You just have to teach the starting point, amplitudes, turning points and ending point. Teaching time will be reduced.
Torch Angle Display (Teach Pendant)
Torch angle is displayed on the screen, making it possible to reduce teaching time and obtain consistent bead appearance
Overlap Function (CO₂/MAG welding)
In case of interruption during welding, the torch is stepped back by reboot and resumes the welding from the welding end point.
Parallel Shift + RT Axis Rotating
Teaching time of same workpieces is reduced.
Arc Start Retry (CO₂/MAG welding)
Detecting a failure of arc start, the robot automatically starts arc ignition again.
MODEL |
TL-1800 |
TL-2000 |
|
MAXIMUM PAYLOAD |
8 |
6 |
|
ROBOT WORKING AREA |
MAX (MM) |
1801 |
1999 |
MIN (MM) |
383 |
491 |
|
MOMENTARY MAXIMUM SPEED |
RT |
195 |
|
UA |
197 |
||
FA |
205 |
||
RW |
385 |
||
BW |
375 |
||
TW |
624 |
||
POSITION REPEATABILITY |
± 0.08 |
± 0.15 |
POWER SOURCE MODEL
POWER SOURCE MODEL |
YD-350GR3 |
YD-350GB2 |
YD-350GZ4 |
INPUT POWER SOURCE |
3 PHA , 380V , 50/60HZ |
||
WELDING METHODS |
MIG/MAG |
||
OUTPUT CURRENT / DUTY CYCLE |
30-350A , 60% @ 350A |
||
OUTPUT VOLTAGE ADJUSTABLE RANGE |
12-36 VDC |
||
APPLICABLE MATERIAL |
inox,steel… |
||
WIRE DIA. |
0.8 – 1.2 MM |
||
“WELD NAVIGATION” * |
KHÔNG |
KHÔNG |
CÓ |
* WELD NAVIGATION : TÍNH NĂNG TỰ ĐỘNG ĐƯA RA CHẾ ĐỘ HÀN DỰA VÀO CHIỀU DÀY VẬT LIỆU VÀ KIỂU MỐI HÀN
LIÊN HỆ MUA SẢN PHẨM : 0932 803 885
Reviews
There are no reviews yet.