Full Mark Universal Machines M-series

5.00 out of 5 based on 1 customer rating
1 Review

in stock

Full Mark Universal Machines M-series

The machine is designed as a versatile grinding tool and it is also suitable for light work such as: Grinding, grinding, surface grinding and polishing with a wide range of accessories.
The slider can tilt +/- 15 degrees, and rotate 360 degrees in the horizontal plane. Allows adjustment of tilt and angle of grinding angle …




The sliding table is supported by two pairs of bearings to reduce the load, while the spindle is lubricated to increase service life. The machine can be positioned along the table and can be swiveled horizontally and vertically.

There is a conical hole at each end of the spindle (one side is the ASA50 and the MT5). The main unit can be rotated at an angle of +/- 60 degrees. Helps to increase the rigidity of the workpiece and tool. The anti-friction mount is mounted so that the nails are easiest and smoother.


Swing over bed mm 250×500
Centers distance mm  


Work surface mm 5~25
Grinding wheel speed v/ph 500
X/Y/Z travel mm 180x13x31.75
Tailstock to work head mm 2
Motor HP 1,350

1 review for Full Mark Universal Machines M-series

  1. 5 out of 5


Add a review